Blog

First, chihuly glass chandelier cleaning
(1) Early disassembly
1. Prepare tools: Under normal circumstances, the crystal chandeliers installed in our living room and dining room are small and can be removed and cleaned! The tools we need are gloves, ladders, clean water, soft bristles, tenna water, crystal lamp cleanser or kerosene.

2, disassembly of crystal beads: before disassembly, we need to cut off the lamp power, to prevent electric shock; A sponge pad is placed under the crystal lamp to prevent crystal beads from falling off and being damaged when they are removed. Disassembly, due to the living room and restaurant chandelier is higher, ready to ladder; Additional, as a result of the bead string of crystal lamp is more, had better two people together disassemble. When removing the crystal ball on the crystal lamp one by one, note down the detailed position. Good memory is not as good as bad writing, otherwise after forgetting, the complex crystal lamp will make people crazy.
3, sweep ash: clean the dust on the crystal lamp, the best tool is a brush, to hair long and soft, not paint rinse, and to write the brush word, the longer the better, through electrostatic friction, will remove the dust.

(two) cleaning skills
1, crystal bead wipe: wipe beads, there must be soft cloth stained with detergent diluted water, gently wipe the front and back of the crystal beads, wipe can not hold the bead pull down, so as not to break the beads; If you have kerosene in your home, you can also soak the crystal in kerosene to soften it with stubborn stains, use a discarded old toothbrush, gently wipe it, and then wash it with washing powder solution!

2, wipe bracket accessories: when wiping bracket and accessories, soft cloth should not be stained with water, especially not with alcohol water, so as not to wipe the protective film outside the electric coating and affect the surface gloss effect of the lamp holder. Day that water on crystal chandelier bracket and other metal parts of the cleaning effect is better, you can use a soft cloth dipped in the day that water wipe!

3. Timely replacement of accessories: it is found that the beaded connection buckle is rusty and discolored. It is not beautiful and easy to crack. If bead defect is found, it should be repaired in time.

(three) dry installation
Crystal beads after cleaning, must be dried with a dry cloth and air to hang, otherwise not dry crystal ball itself is a very good "vacuum cleaner". When installing crystal ball go up, must remember to wear the cloth glove that does not drop wool, so can prevent fingerprint and perspiration to imprint effectively on crystal and lamp stand, especially the lamp stand is refracted mostly crystal bright, did mirror processing, the fingerprint on imprint can be shown very clear, wipe very hard.

Two, crystal chandelier maintenance methods
1. Crystal lamps must be cleaned regularly. If there is a regular cleaning crystal lamp can be said to achieve good results. Here reminds everybody to be in cleanness crystal lamp when must cut off the power supply of crystal lamp first, take out the metallic connection that hangs those crystal again next, such ability undertakes cleanness to it. After cleaning, crystal pendants can not stack them together, or to do light light put. After that, water is poured in to clean up the sediment and detergent residue, and a brand new metal chain is created. Generally speaking, it is ok to clean the crystal every other year.

2. The crystal lamp should be maintained regularly. Besides should undertake cleanness to crystal lamp beyond, undertake maintenance to it regularly also is very key. Check when the main is to see whether its lamp frame and light source corrosion, loose situation, if found that there is a problem to replace it.

3, pay attention to the crystal lamp maintenance taboo. Crystal lamp use is also to pay special attention to, in the ordinary use and clean crystal lamp when it is best not to rotate, or easy to cause screw loosening, resulting in unsafe accidents. The switch of crystal lamp also cannot be used continuously, want to cause the damage of illuminant of lamp body.